Table of Contents
Advertisement
TV+ cable
with
a cable
box
equipment
you will need
Use this hook-up
if you need a decoder box to descramble
some
cable channels.
This hook-up
will allow you to use the remote
control
to change
channels.
(1) two-way
splitter,
and
3 lengths
of 75 ohm coaxial
cables.
procedure
(Please
see illustration
on the following
page.)
_]} Connect
the incoming
c.able to the IN terminal
on the two-way
splitter.
O Connect
a coaxial cable, to one of the OUT terminals
on the same
splitter;
connect
the other end of this cable to the ANT-A
terminal
on the back of the TV.
Connect
the second coaxial cable to the second OUT terminal
on
the same splitter;
connect
the other end of this cable to the IN
terminal
on the decoder
box.
Connect
the third coaxial cable to the OUT terminal
on the back
of the decoder
box, and the other end of this cable to the ANT-B
terminal
on the back of' the TV.
30
Chapter
2 : Connecting
Your TV
Advertisement
Table of Contents
