Table of Contents
Advertisement
TV+VCR+antenna
or cable
without
a cable
box
(cont.)
procedure
O Connect
the incoming
cable or antenna
t(_ the ANTENNA
IN
terminal
on the VCR.
Connect
one end of a coaxial cable to the ,_qTENNA
OUT
terminal
on the VCR.
Connect
the other end of the comxial cable to the antenna
termi-
nal on the TV.
0
Connect
an RCA pin-type
video cable to tSe VIDEO
OUT termi-
nal on the back of the VCR. Connect
the other end of tlhis cable
to the VIDEO INPUT
terminal
on the back of the TV.
DImportant:
(CS-27309
only)
If you are co:nnecting
a Super VHS VCR, use an
S-video cable instead
of an RCA pin-type
video cable. Connect
one
end of the S-video cable to the S-Video OUT terminal
on the VCR.
Connect
the other end of the ('.able to the S-Video IN terminal
on
the TV.
Connect
a set of RCA pin-type
audio cables to the AUDIO OUT
terminals
on the back of the VCR. Use the red cable to connect
the right (R) channel
and the white cable for connecting
tile left
(L) channel.
O Connect
the other
ends of this cable to 1;he AUDIO INPUT
terminals
on the back of the television.
_>Important:
If your VCR is monaural
(non-stereo),
you w:ll only connect a single
RCA pin-type
audio cable. Connect
the cable to the VCR, then
connect
the other
end to the L (LEFT) audio input
on the back of
the television.
Important:
If your VCR has a video channel
switch,
set it to "OFF/AV." See
your VCR's owner's
guide for details.
Begin playing
a tape on the VCR.
O To view the VCR, select the external
input
source by using the
INPUT
button
on the front control
or on the remote
control.
26
Chapter
2: Connecting
Your TV
Hide quick links:
Advertisement
Table of Contents
