Table of Contents
Advertisement
TV+VCR+antenna
or cable
without
a decoder
box
(cont.)
L>Important:
L>Important:
procedure
O Connect
the incoming
cable or antenna
to the ANTENNA
IN
terminal
on the VCR.
Connect
one end of a coaxial cable to the ANTENNA
OUT
terminal
on the VCR.
Connect
the other end of the coaxial cable to the antenna
termi-
nal on the TV.
Connect
an RCA pin-type
video cable to the VIDEO OUT termi-
nal on the back of the VCR. Connect
the other end of this cable
to the VIDEO INPUT
terminal
on the back of the television.
O
Connect
a set of RCA pin-type
audio cables to the AUDIO OUT
terminals
on the back of the VCR. Use the red cable to connect
the right (R) channel
and the white cable for connecting
the left
(L) channel.
Connect
the other
ends of this cable to the AUDIO INPUT
terminals
on the back of the television.
If your VCR is monaural
(non-stereo),
you will only connect a single
RCA pin-type
audio cable. Connect
the cable to the VCR, then
connect
the other end to the L (LEFT)
audio input
on the back of
the television.
If your VCR has a video channel
switch, set it to "OFF/AV."
See
your VCR's owner's
guide for details.
Begin playing
a tape on the VCR.
To view the VCR, select the external
input source
by using the
INPUT
button
on the front control
or on the remote
control.
30
Chapter
2: Connecting
Your TV
Hide quick links:
Advertisement
Table of Contents
