When You First Power On The Tv - Mitsubishi WD-57833 Owner's Manual

12 2. TV Setup
• ParentalLocks. Restrict TV viewing by
program rating, by channel, or by time of day.
You can also disable the front-panel buttons
if you have small children. See the Lock >
Parent menu, the Lock > Front Panel menu,
and Setup > Edit > Lock.
Video Settings. Change video adjustments to
get the best picture for your viewing conditions.
See "AV Menu."
Note:
2_
You may wish to change the Picture Mode from
the default Brilliant to either Bright or Natural
which are suitable for most home viewing.
To program the remote control to operate A/V
devices not under NetCommand control, see
Appendix D, "Programming the Remote Control."
TV Care
Lamp Cartridge. When the lamp cartridge
needs replacement, replace the lamp yourself
and save the cost of a service call. See
Appendix B for instructions.
General Cleaning. See the cleaning recom-
mendations under "Important Information
About Your TV."
Assistance
For troubleshooting, service, and product
support, see Appendix E.
For warranty information, see the TV warranty
in the back of this book.
Choosing a Language for Menus
1. Power on the TV for the first time.
2. Press A Y to select either English or Spanish
for all menus. You can later change the language
selection through the Setup menu Language
option.
Welcome
When you first power on the TV, the Welcome screen lets
you change the menu language.
Use the Setup menu for basic TV setup options.
1. Press MENU to open the Main menu.
2. Press Y to highlight the Setup icon and display the
Setup menu.
2.
3_
Remove the remote control's back cover by gently
pressing in the tab and lifting off the cover.
Load the batteries, making sure the polarities (+)
and (-) are correct. For best results, insert the
negative (-) end first.
Snap the cover back in place.
@
®
The remote control requires two AA alkaline batteries.
Setup menu highlighted in TV Main menu