Frequently
asked questions
Issue
Detergent is left in the
dispenser
at the end of
a program.
The detergent
lid
cannot be closed
properly.
The door and the
interior walls are still
wet after a program
has
finished.
Water remains in the
wash cabinet at the end
of a program.
Possible fault
The dispenser was damp
when detergent was
added.
Detergent residue is
blocking the catch.
This is not a fault!
It is the normal operating
mode of the drying
system.
Solution
Dry the dispenser before
adding detergent.
Remove the residue.
The moisture will evaporate
after a short time.
Before fixing the fault:
- Turn the dishwasher off
The triple filter in the
Clean the triple filter. See
wash cabinet is clogged.
"User Maintenance
Instructions".
The drain pump or the
Clean the drain pump and
non-return valve may be
the non-return valve, see
blocked,
maintenance
instructions.
The drain hose is kinked.
Remove any kinks from the
drain hose.
31