Table of Contents
Advertisement
save mode.
Power
(with power light
indicator)
Using the On-Screen Display (OSD) Menu
Accessing the Menu System
NOTE:
If you change the settings and then either proceed to another menu or exit the OSD menu, the monitor automatically saves those changes. The
changes are also saved if you change the settings and then wait for the OSD menu to disappear.
1.
Press the MENU button to launch the OSD menu and display the main menu.
Main Menu for Analog (VGA) Input
or
Main Menu for Digital (DVI-D) Input
NOTE:
AUTO ADJUST is only available when you use the analog (VGA) connector.
2.
Press the
and
buttons to move between the setting options. As you move from one icon to another, the option name is highlighted. See the
following table for a complete list of all the options available for the monitor.
Press the
or
button once to activate the highlighted option.
3.
4.
Press the
and
buttons to select the desired parameter.
5.
Press
to enter the slide bar and then use the
6.
Press the
button once to return to the main menu to select another option or press the
Icon
Menu and Submenus
Energy Gauge
or
button, according to the indicators on the menu, to make your changes.
button two or three times to exit from the OSD menu.
Description
This meter shows the energy level being consumed by the monitor in r
consuming low energy level. When the energy consumed increases, th
Hide quick links:
Advertisement
Table of Contents
