Accessing The Menu System - Dell E2209WFP User Manual

D Use this button to select the input source or select an OSD menu option.
Use the Input source button to select one of the two different video signals that may be connected to your monitor:
If both VGA and DVI cables are connected to one Computer, this monitor displays an image automatically as long as a video signal is
OK / Input Source
present in either VGA or DVI outputs. On a display connected to two Computers, set equal time for both screen savers. The video input
Select
from the movement of the first mouse will activate the display.
As you cycle through the inputs, the following messages appear to indicate currently selected input source. It may take 1 or 2 seconds
for the image to appear.
If either VGA or DVI-D input is selected and both VGA and DVI-D cables are not connected, a floating dialog box as shown below
appears.
E Use the Power button to turn the monitor on and off.
The blue LED indicates the monitor is on and fully functional. An amber LED indicates DPMS power save mode.
Power button
(with power light
indicator)
Using the On-Screen Display (OSD) Menu

Accessing the Menu System

NOTE: If you change the settings and then either proceed to another menu or exit the OSD menu, the monitor automatically saves those changes. The changes are also saved if you
change the settings and then wait for the OSD menu to disappear.
1.
Push the MENU button to launch the OSD menu and display the main menu.
Main Menu for Analog (VGA) Input
VGA input
DVI-D input
or
or
or