Maytag Performa MBF1956HES Use & Care Manual page 10

installing Front-Mounted Handles for
Stainless Steel Door
1. Loosen lower door clip on door
with a phillips screwdriver.
installing Front-Mounted Handles for
Stainless Steel Freezer Door
1. Loosen lower door clip on door
with a phillips screwdriver.
2. Locate preddlled hole at base of
handle, and fit hollow end of
handle over lower door clip.
3. Fit other end of handle over upper
door clip and slide up as far as
possible.
NOTE: If top of handle does not
fit over top clip, loosen lower clip
further until fit can be
accomplished.
/4. Insert pNllips screwdriver into
predrilled hole at base of handle
to tighten screw. Insert plastic
button plug into hole.
J
Removing Front-Mounted Handles for
Stainless Steel Door
1. Remove plastic button plug at base of handle with a
very small flat-blade screwdriver.
, Insert phillips screwdriver into /f/-_ 1
predrilled hole to remove screw.
2. Slide handle down and remove
from door clip.
2. Locate predrilled hole at
base of handle, and fit hollow
end of handle over left door
clip.
.
.
Fit other end of handle over \
left door clip and slide left as
far as possible.
NOTE: If end of handle does
not fit over left clip, loosen
right clip further until fit can
be accomplished.
Insert phillips screwdriver
into predrilled hole at end of
handle to tighten screw.
Insert plastic button plug into hole.
Removing Front-Mounted Handles for
Stainless Steel Freezer Door
1. Remove right side plastic button
plug at end of handle with a ....
very small flat-blade screwdriver.
, Insert phillips screwdriver into
predrilled hole to remove
screw.
2. Slide handle right and remove
from door clip.