Setting Air Fluff - Maytag Neptune MD9800AYW Use & Care Manual

I|
Step
Select the temperature. Choose the appropriate
temperature for drying the load. See page 6 for a
detailed description of these temperatures.
Step
Review Screen -The Review Screen lists the selected settings. At
this point you may press Start/Pause to begin drying the load or
select "options" for further customization of the drying cycle.
Step
Options Screen -The option choices on the lefc
turn the options on or off. The option choices on the
right show an additional screen with multiple choices.
The following options may be added to customize
your "time dry" cycle:
• "wrinlde prevent"
• "damp dry chime"
• "remind chime"
• "end of cycle chime"
See page 7 for a detailed description of these options.
When the desired selections are made, touch
"continue" to see the review screen once again.
Step
Review Screen -The review screen will appear once again
to verify your selections. If they are correct, press
Start/Pause. If they are incorrect, press the area you would
like to change.
;ETTING
AIR FLUFF
"air fluff" tumbles the load with room temperature air.
I[
Step
Select "air fluff" from the Home screen.
Step
Use the up or down arrow to select the tumble time.
Select "options" if desired to select options for the load.
The review screen will appear once again to verify your
selections. If they are correct, press Start/Pause.
8