Maytag Jetclean MDB9000 User Manual page 8

Rinse Aid
Regular use of a rinse aid improves drying, reduces
spotting and filming, and reduces moisture left on
the dishwasher interior.
Your Maytag Jetclean ®dishwasher features an automatic
rinse aid dispenser located near the detergent cups in the
door.
The clear window in the center of the dispenser cap
allows you to see if there is rinse aid in the reservoir.
To add rinse aid to the dispenser, turn the cap counter-
clockwise to open. Remove the cap and pour liquid rinse
aid into the opening. Replace the cap and turn it clock-
wise. The adjustable cap allows you to adjust the amount
oeooeooeooeeeoeoeoeoeeeoee
of rinse aid dispensed. A raised dot on the cap indicates
the recommended initial setting. Typically, use the LESS
setting for soft water and the MORE setting for hard
water. Set the cap anywhere between these amounts as
needed. °lo improve drying, turn the cap towards the
MORE setting. When adjusting or replacing the cap, be
sure it is securely in place before closing the dishwasher
door.
eooeoeooeoeooeeoeeoeooeeoo
Usage TIPS
• Use HOT Water [1200-130 ° F (49-56 ° C)
recommended]
ttot water dissolves and aetivates the detergent,
dissolves grease from the load and improves drying
results. Refer to page 6 for more information.
• Use the Proper Amount of Detergent
For best soil removal, good drying results and pre-
vention of filming, etching and spotting, the proper
amount of detergent must be used. Refer to page 6
for recommended amounts.
• Use a Rinse Aid
Regular use of a rinse aid improves dD4ng results
and reduces spotting and fihning. See above for
more information.
• Load the Dishwasher Properly
"lb ensure soiled surfaces get adequate wash action,
carefully fi)llow the loading instructions on pages
3-.5.
•
Select the Proper Cycle
The cycle selection depends on the amount of food
soil on the load. See page 8 for cycle descriptions.
• Select Heated Dry
For improved drying select Heated Dry'.
7