Advertisement
hen using the TV remote
with a VCR, first make
certain it is set to control your
VCR ( by the REMOTE
CODE or
SEARCH
method
- see following
section).
_
Press theVCR
System
I button on the remote.
Point the top of the remote
Record Button
Hold the RECORD button down, and
then press the PLAY button to begin
a VCR recording.
Rewind
Button
Press to rewind tapes. For some
VCRs you may need to press STOP
button first then REWIND. In
playback mode. hold button down to
view picture moving rapidly in
reverse.
Press to temporarily stop the tape dur-
ing a playback or recording. Press
again to release Pause.
T¥-VCR
Button
Press to the VCR position ("VCR"
indicator on the VOR will light) to
view the playback of a tape. Press
again to place in the TV position
("VCR" in_cator on the VCR will go
OFF) to view one program while
recording another program.
PLAY
STATUS
.glay._lhalaa.
Press to playback a tape. Hold down
after pressing the RECORD button to
start a recording.
Press to stop the tape.
-Fast Forward Button
Press to rapidly advance the tape. For
some VCRs you may need to press
STOP first then FF. In Playback
mode hold button down to view the
picture moving rapidly in the forward
direction.
.Ch;_nnel Scan Buttons
Press to scan up or down through
VCR channel numbers.
Number
Buttons
Press buttons for direct VCR channel
selections.
VCR System Button
Press to send remote commands to
the VCR.
Press to turn the VCR ON and OFF.
I
Remember.
The VCR
buttons
on the remote
will
not operate your VCR if those
features
are not already t'ound on
your VCR remote
control.
Note: All VCR functions
(particularly Search, Rewind, Fast
Forward, etc.) will operate the
same as with the original VCR
remote control provided with the
VCR.
23
Advertisement
