ou can view the playback of
VCR tapes (Video Disc
Players, camcorders, etc). by
using the AUDIO and VIDEO
INPUT jacks (on the rear of the
IV).
For example:
to view the
playback
of a VCR tape:
_,,,_
Connect the AUDIO and
VIDEO INPUT jacks on the TV
to the AUDIO and VIDEO
OUTPUT jacks on the VCR.
_
Press MENU • or • on the
TV (or on the remote press M
button and then M ••
buttons.)
Select the word INPUT with the
TV's on-screen Arrow.
Press (+) or (-) button to
select the VCR/AUX(iliary)
INPUTS on the rear of the TV.
4_
Turn the VCR ON and PLAY
the VCR tape to be viewed on the
TV.
0
Remember! When you're
through using the A/V INPUT
jacks, return the INPUT display
screen on the TV to ANT(enna).
Then you will be ready to view
TV programs coming from the
normal antenna _onnections.
If you leave the TV in the
VCR/AU_
INPUT mode and
there is no signal source
connected to the jacks, you will
be seeing only a blank screen on
the TV.
NOTE: If you have a mono
(single audio OUTPUT) VCR,
"Y" Connectors are available
(from your dealer or Parts
Information Center 1 800 292-
6066) to connect the mono audio
to both R and L audio inputs on
the TV.
VIDEO OUT
(YELLOW)
21
BACK OF TV
AUDIO OUT
(RED/WHITE)
VCR
!!!!!!!!!!!:!i!!!!:i:?:!!::
888
iiiiiiiiii!ii!iii!i !i
UH_VHF
ANTENNA
CABLE TV
SIGNAL
PICTURE AND SOUND
FROM PLAYBACK
OF
VCR TAPE
....