Table of Contents
Advertisement
Hookups (cont'd) 9
•
••
•
•
•
.
•
•
•
.
Connectine the DVD Player to a TV only (no stereo or amplifier)
TV has audio (red and white) and S-Video In jacks
• For better picture quality,use an optional S-Video cable to connect the S-VIDEO OUT jack on the DVD
Playerto the S-VIDEO IN jack on your TVYou will not use theVIDEO OUT jack on the DVD Player, a nd you
will not need the yellow video cable.
• Set DOLBY DIGITAL and DTS to OFF on the DVD Player. D etailsare on pages38-39. If you playa DVD
when the settings are wrong, the sound will be distorted or you may damagethe speakers.
DVD
Player
0o
0 ooo
&l
Q
S-VIDEO I#
LEFT AUDIO IN
RIGHT AUDIO IN
Back ofTV
•
(example
only)
I
Connect the red and white audio cables to the red and white AUDIO
OUT jacks on the DVD Player and to the red and white AUDIO
IN jacks
on theTV, matching the cable colors to the jack colors.
2
Connect an S-Video cable (not supplied) to the S-VIDEO OUT jack on
the DVD Player and to the S-VIDEO
IN jack on theTV.
3
Connect the TV's power cord to a power outlet.
Turn on the "IV and set it to the S-VIDEO IN channel. This channelusuallyis
located near channel00. See your'iV owner's manualfor details.
4
Connect the DVD Player's power cord to a power outlet.
Press the POWER button to turn on the DVD Player. "HELLO" will appear
briefly on the DVD Player's displaypanel,Youshouldsee the DVD logo on theTV
screen.If you do not, check your connectionsand make sure theTV is on the cor-
rect Audio/Video In channel.
Advertisement
Table of Contents
