Table of Contents
Advertisement
Connecting to a TV and a Stereo
• Set DOLBY DIGITAL and DTS to OFF on the DVD Player. D etails are on pages38-39. If you play a DVD
when the settings are wrong,the soundwill be distortedor you may damage the speakers.
Back of TV
{exampleonly)
DVD Flayer
ii
iE)IGITAL AL_F_ OUTj
•
!A4JDiO OUT
© o'o"o
S_DEO
_0
L
....?l
....
._J
........
VIDEOIN
I
I
o Ao,t
@.oo.o,..,..
j
Back
o[ Stereo
(example only)
Connect the red and white audio cables to the red and white AUDIO OUT
jacks on the DVD Player and to the red and white AUDIO
IN jacks on the
Stereo, matching the cable colors to the jack colors.
2
Connect the supplied video cable (yellow) to theVIDEO
OUT jack on the
DVD Player and to theVIDEO
IN jack on theTV.
(Or, you may connectan optionalS-Videocableto the S-VIDEO OUT jack on the
DVD Playerand to the S-VIDEO IN jack on theTV)
3
Plug in the Stereo's power cord.Turn on the Stereo and select the Stereo's
Auxiliary IN station. During Disc playback, you will adjustthe volumeat your
Stereo.See your Stereo owner'smanualfor details.
4
Plug in theTV's power cord.Turn on theTV and set it to theVideo In chan-
nel (or S-Video In channel), which usually is located near channel 00. During
Audio CD playback, you may check the statusofAudio CDs on yourTV screen.During
DVD playback, you wilt watch the programon the T_. SeeyourTV owner'smanualfor
details.
5
Connect the DVD Player's power cord to a power outlet.
Press the POWER button to turn on the DVD Player. "HELLO" will appear
brieflyon the DVD Player'sdisplay panel.You shouldsee the DVD logoon theTV
screen.If you do not. checkyour connections and makesure the'iV ison the correct
channel.
Advertisement
Table of Contents
