Custom Program - LG WM2455H Series User's Manual & Installation Instructions

HO TO USE
CUSTOM PROGRAM
CUSTOM PROGRAM allows you
to store a customized wash cycle
for future use. It allows you to save
favorite temperature, spin speed, soil
level, and other options for a cycle, and then
recall them at the touch of a button.
To store a Custom Program:
O Select a cycle.
O Adjust the Wash/Rinse Temperature, Spin
Speed, and Soil Level to the desired settings.
O Set other desired options.
any
O Press and hold the CUSTOM PROGRAM
button for 3 seconds. You will hear two
beeps to confirm the settings have been
stored.
IMPORTANT: If you press and hold the CUSTOM
PROGRAM button for 3 seconds, you will
overwrite any previously stored CUSTOM
PROGRAM.
To recafl a Custom Program:
O Press and release the CUSTOM PROGRAM
button. The stored settings will be displayed.
O Press and release the START/PAUSE button
to start the cycle. The washer will start
automatically.
LOAD SIZE SENSING SYSTEM
At the beginning of the cycle, the washer tumbles
the load and detects the weight of the
clothes. The display will indicate the
approximate load size in the LOAD SIZE
display. This allows you to adjust the
amount of detergent and other additives for best
results and improved efficiency.
y .......................................................................................................................................................................................................................................................................................................................
The LOAD SIZE display:
Example 1: If thewasher hasdetected a smallloadsize,the
display mayonlyshowonelightedbar.0nlya smallamount o f
detergent should be used, b ecause theamount o fclothing and
the quantity of waterthat will beusedissmall.
Detergent
Recommended[-_]_ manufacturer's
amountfor t -_ --jl recommended
' 10ad _._,J_ _1 amount for a
this
____ full 10ad
Example 2: If thewasher hasdetected a largeloadsize,
thedisplay mayshowall fourbarslighted. M oredetergent
shouldbeused, b ecause theamount o fclothing andthe
quantity of waterthatwill be usedis greater.
_Detergent
Recommended [ -_-- manufacturer's
amount for "--Jm .... Jl recommended
. amountfor a
th_s10ad L._-_ full 10ad
NOTE: Because t hewasher uses a verysmallamount o f
water, c areshouldbetakenwhendeciding howmuch
detergent to use.Normal l oads onlyneed abouthalfthe
detergent manufacturer's recommended amount. This
saves detergent b yusingit in a moreconcentrated manne£
However, for heavily soiledloads, a dditional detergent should
beadded. N ever exceed manufacturer's recommendations!
To use Automatic Load Size Sensing:
O Load the washer, select the desired cycle and
options, and then start the cycle by pressing the
START/PAUSE button.
O The washer will tumble for a short time to detect
the size of the load. After the washer detects
the load size, the washer will show the detected
size in the LOAD SIZE display for 10 seconds
before it continues with the cycle.
O During delay step three, press
the 10 second in
the START/PAUSE button to pause the cycle.
O Fill the detergent and additive compartments
of the detergent drawer with detergent/additive
amounts based on the load size the machine
has detected. Following these guidelines can
save detergent.
O Press the START/PAUSE button again to resume
the cycle.
To check the load size during the wash portion of the
cycle, press and hold the RINSE+SPIN button for 3
seconds. The LOAD SIZE display will be activated for
10 seconds.
NOTE: The load detection routine only works with
dry clothes. Since the detection system is detecting
the WEIGHT of the load, it will be affected by
unusually heavy articles in the load. For example,
a garment that is already wet that is loaded with
other items will cause the LOAD SIZE reading to
be inaccurate.
If you do not desire to take advantage of the load
size detection feature, simply load the desired
amount of detergent and additives in the dispenser
and start the washer in the usual manner.
25