Page 2
Setup Firmly press the thumb tab and pivot the upright up until it locks in a nearly verti- Hand cal position. Insert the handles into the stem until the To prevent lock pins are visible in the holes in the serious Injury: stern.
Page 3
Part List/Exploded Drawing Model No. 831.4ui:i )4u R0700A No. Qty. Description Deck Head Tube Fork Upright Stem Handle Foam Pad Handle Cap Lock Pin Handle Cord Quick Release Upright Clamp w/Ring Bearing Nut Bearing Cap Bearing Bearing Race Bushing Pivot Union Bolt Set Front Union Bolt Set Rear Union Bolt Set Wheel...
Page 4
If the quick-release doesn't hold the stem snug in place, you will need to adjust it. Close Open Quick Open the quick-release lever. Turn the adjustment nut Release clockwise one half turn while keeping the lever from turn- ing. Close the lever. Repeat this procedure until the stem is held snug in place.