LG WM3431H Series Owner's Manual page 5

Install or store unit where it will not be exposed to temperatures below freezing or
exposed to outside weather conditions.
Properly ground washer to confbrm with all governing codes and ordinances.
To reduce the risk of electric shock, do not install the washer in humid spaces.
The base opening must not be obstructed by carpeting when the washing machine is installed on a
carpeted floor.
In areas where there are areas which may be subject to infestation by cockroaches or other vermin, pay
particular attention to keeping the appliance and its surroundings in clean condition at all times.
Damage caused by cockroaches or other vermin will not be covered by the appliance warranty.
[] Shipping bolts
The appliance is fitted with shipping bolts to prevent internal damage during transport.
[] Removing shipping bolts
1. To prevent internal damage during transport,
4 locking bolts are installed. Before operating
the washer, remove the bolts.
3. Take out the 4 bolts by twisting the braces
slightly. Keep the 4 bolts and the wrench for
future use.
• If they are not removed, it may cause severe • Whenever the appliance is transported, the
vibration, noise, and malfunction, shipping bolts must be replaced.
2. Unscrew the 4 bolts with the wrench
supplied.
cap_
4. Close the holes with the caps supplied.