Connecting The Drain Line - LG WM0642H User's Manual & Installation Instructions

Hide thumbs Also See for WM0642H:
Table of Contents

Advertisement

Available languages

Available languages

INSTAllATiON INSTRUCTIONS
CONNECTING THE DRAIN LINE
The drain hose should always be properly
secured. Failure to properly secure the drain
hose can result in flooding and property
damage.
Do not install the end of the drain hose higher
than 96 in. (244.8 cm) above the bottom of the
washer.
The drain must be installed in accordance with
any applicable local codes and regulations.
• Make sure that the water lines are not stretched,
pinched, crushed, or kinked.
Option
1: Standpipe
Elbow
Clip the end of the hose into the elbow bracket.
Insert the end of the drain hose into a standpipe.
Use tie strap to secure the drain hose in place.
NOTE: Total height of the hose end should not
exceed 96 in. (244.8 cm) from the bottom of the
washer.
Option
2: Laundry
Tub
Elbow
Bracket
Laundry
Tub
in
Strap
Hose
Clip the end of the hose into the elbow bracket.
Hang the end of the drain hose over the side of
the laundry tub. Use tie strap to secure the drain
hose in place.
NOTE: Total height of the hose end should not
exceed 96 in. (244.8 cm) from the bottom of the
washer.
Option
3: Floor Drain
Drain Hose
Floor Drain
Insert the end of the drain hose into the floor
drain. Secure the hose in place to prevent it
from moving.
15

Hide quick links:

Advertisement

Chapters

Table of Contents
loading

Table of Contents