Sharp SD-AT1000 User Manual page 17

! Audio connection to TVs or other equip-
ment
You can enjoy surround sound from TVs or other equipment by connecting
them to the unit as shown.
Audio signal
To audio
Audio cable
input sockets
(commercially available)
Audio signal
To audio
input sockets
Audio cable
(commercially
available)
Caution:
Turn off all other equipment before making this connection.
Notes:
" Refer to the operation manual of the equipment to be connected.
" Insert the plugs fully to avoid fuzzy pictures or noise.
! Using other subwoofer
For a greater emphasis of bass, a commercially available subwoofer, with a
built in amplifier, can be connected to the unit using the SUBWOOFER PRE
OUT socket.
To audio
output sockets
TV
Notes:
" No sound is heard from the speaker in which an amplifier is not built in.
Other
" When not using the supplied subwoofer, disconnect the speaker wire from the
equipment
main unit.
" The speaker delay and level settings are applied to the subwoofer connected to
the SUBWOOFER PRE OUT socket (see pages 23 and 24).
! Connecting the AC power lead
To audio
output sockets
After checking all the connections have been made correctly, plug the AC power lead
of this unit into the wall socket.
Note:
Unplug the AC power lead from the wall socket if the unit will not be in use for a pro-
longed period of time.
03/3/14
To subwoofer
To subwoofer
input socket
Subwoofer signal
output socket
Audio cable
(commercially available)
SD-AT1000H_SEEG_E.fm
SD-AT1000H
ENGLISH
Commercially
available subwoofer
(amplifier built in)
Wall socket
(AC 230 V, 50 Hz)
E-12
TINSZ0943AWZZ
1
2
3
4
5
6
7
8