Advertisement
Available languages
Available languages
NOTE
about LP Gas Tank Exchange
Programs
•
Many retailers that sell grills offer you the option of
replacing your empty LP Gas tank through an exchange
service. Use only those reputable exchange
compa-
nies that inspect,
precision
fill, test and certify their
tanks. Exchange your tank only for an OPD safety fea-
ture-equipped
tank as described
in the LP Gas tank
section of this guide.
• Always keep new and exchanged LP Gas tanks in an up-
right position during use, transit or storage.
•
Leak test new and exchanged LP Gas tanks BEFORE
connecting one to your grill.
How to Leak Test your LP Gas Tank
For your safety:
All leak tests must be repeated
each time your LP
Gas tank is exchanged
or refilled.
When checking for gas leaks do not smoke.
Do not use an open flame to check for gas leaks.
Your grill must be leak tested outdoors
in a well-ven-
tilated area, away from ignition sources such as gas
fired or electrical appliances. During the leak test, keep
your grill away from open flames or sparks.
Do not use household
cleaning agents. Damage to
gas assembly components
can result.
[]
Use a clean paintbrush and a 50/50 mild soap and
water solution.
[]
Brush soapy solution onto LP Gas tank in the ar-
eas indicated by the arrows. See diagram.
[]
If growing bubbles appear do not use or move the
LP Gas tank. Call an LP Gas Supplier or your Fire
Department.
LP Gas
Model
only:
Secure
a 201b
LP Gas
Tank
to Gas
Grill
[]
Turn your LP Gas Tank Valve clockwise to the closed
or OFF positon.
[]
Open the door and unscrew the Wing Bolt from right
bracket of tank holder.
[]
Place LP Gas tank into tank holder. Be sure bottom
of tank fully rests in cutout in bottom shelf.
[]
Install the tank so the Tank Valve faces the rear right
corner of cabinet.
[]
Align and screw the Wing Bolt into right bracket of
tank holder to secure the gas tank.
Attach the Regulator with Hose to the gas tank.
!
One Nut
is
fixed to
Tank Holder. An addi-
tional Nut and Wing
Bolt is secured AFTER
inserting tank into tank
hole.
Additional
Nut
J
__-._
....__.I
_
/
If growing bubbles appear do not use or move the
LP Gas tank. Contact an LP Gas Supplier or your fire
department!
Tank
Holder
Wing
Bolt
1!4"xl/2"
Qty.
1
Part # S233G04084
(Already
installed
on the Tank
Holder.)
13
Tank tray
Advertisement
