Table of Contents
Advertisement
ELECTRONIC OVEN CONTROL
BROIL
2
3
HOUR
MIN
__
TART
O_
urns
F
9
10
11
12
1. Display
2. CLOCK
3. TIMER
4. Oven Light/Oven Lockout
5. Oven Selectors
6. SELECT CLEAN
TM
Self-Clean
(on some models)
7. Temperature Setting
8. Timed Cooking
9. HOUR
10. MINUTE
11. START/ENTER
12. OFF/CANCEL
Display
When power is first supplied to the appliance, everything on the
display will light up for 5 seconds. Then the time of day and "PF"
will appear on the display.
Any other time "PF" appears, a power failure occurred. To
remove "PF" and to reset the clock, press OFF/CANCEL
When the oven is in use, this display shows time, temperature
and what command pads have been pressed.
When the oven is not in use, the display will show the time of day.
Start/Enter
The START/ENTER pad begins any oven function except the
Timer. If not pressed within 5 seconds after pressing a pad,
"START?" will appear on the display as a reminder. If not pressed
within 5 minutes after pressing a pad, the display will show the
time of day and the programmed
function will be cancelled.
Off/Cancel
The OFF/CANCEL pad stops any oven function except for the
Clock, Timer and Cooktop or Oven Lockouts.
After pressing OFF/CANCEL,
the display will show the time of
day or, if the minute timer is also being used, the time remaining.
Clock
This is a 12 hour clock and does not show a.m. or p.m.
To Set:
1. Press CLOCK.
2.
Press the HOUR/MIN "up" or "down" arrow pads until the
correct time of day shows on the display.
3.
Press CLOCK or START/ENTER.
Tones
Tones are audible signals, indicating the following:
One tone
•
Valid pad press
=
Oven is preheated
•
Function has been entered
Three tones
•
Invalid pad press
Four tones
=
End-of-cycle
•
Reminder, repeating each minute after the end-of-cycle
tones
Error Tones
Error tones indicate a problem with the electronic oven control.
An error code will appear in the display.
Tone Volume
The volume can be adjusted between high and low.
To Change: Press and hold DELAY START for 5 seconds. A short
tone will sound and either "Snd HI" or "Snd Lo" will appear on the
display. Press and hold DELAY START again for 5 seconds to
change to desired setting.
To remove "Snd on", "Snd OFF", "rEP on", "Snd HI" or "Snd Lo"
press any pad, and the time of day will appear on the display.
Reminder
Tones
Reminder tones are four 1-second tones which indicate that the
set time has expired for a timer or a timed oven control function.
Timer
To Turn Tones Off/On: Press and hold SET/OFF for 5 seconds. A
short tone will sound and "rEP OFF" will appear on the display.
Repeat to turn back on.
"rimed Cooking
To Turn Tones Off/On: Press and hold COOK TIME. A short tone
will sound and "Snd OFF" will appear on the dispray. Repeat to
turn back on.
11
Hide quick links:
Advertisement
Table of Contents
