Advertisement
Available languages
Available languages
WARNING
Electrical Shock Or Personal Injury
Hazard
Disconnect
electrical
supply before
servicing
or cleaning the unit.
Failure to do so could result in elec-
trical shock or personal injury from
cleaner suddenly
starting,
TO CHECK BRUSHES:
When brushes
are worn to the
level of the base
support bars,
replace the
brush dowel.
I. Remove POWER-MATE
TM
cover, belt and
brush assembly. See "To remove belt" in
BELT CHANGING
AND BRUSH
CLEANING°
2. Remove brush supports, washers,
screws, end brush, brush sprocket pieces
from ends of brush assembly.
3. Reassemble
brush assembly. To line up
screw holes in dowel, sprocket and end
brush, be sure the brush portion of end
brush lines up with brushes on brush dowel.
4. Replace belt, brush assembly, POWER-
MATE
TM
cover, light bulb and light cover. See
"To replace belt" in BELT CHANGING
AND
BRUSH CLEANING
_Washer
End
Cap
Brush
Sprocket
End
Flange
Brush
End
Screw
Cap
Screw
i
Agitator Unit
Washer
Brush Sprocket
t7
Advertisement
