Assign Default Numbers And Addresses; Ringing Tones, Images, And Call Text For Contacts - Nokia 5800 XpressMusic User Manual

Contacts (phonebook)
Add contacts to favourites — Tap and hold a contact, and
select Add to favourites.
Listen to the voice tag assigned to a contact — Select the
contact and Options
>
Play voice tag.
Before using voice tags, note the following:
● Voice tags are not language-dependent. They are
dependent on the speaker's voice.
● You must say the name exactly as you said it when you
recorded it.
● Voice tags are sensitive to background noise. Record voice
tags and use them in a quiet environment.
● Very short names are not accepted. Use long names, and
avoid similar names for different numbers.
Note: Using voice tags may be difficult in a noisy
environment or during an emergency, so you should not rely
solely upon voice dialling in all circumstances.
Assign default numbers and
addresses
If a contact has several numbers or addresses, a default
number or address makes it easier for you to call or send a
message to the contact. The default number is also used in
voice dialling.
1. Select Menu > Contacts.
2. Select a contact and Options
38
Voice tag details Options
>
> Defaults.
3. Select a default to which you want to add a number or an
address, and select Assign.
4. Select a number or an address you want to set as a default.
5. To exit the Defaults view and save the changes, tap
>
outside the view.
Ringing tones, images, and call text
for contacts
You can define a ringing tone for a contact or contact group,
and an image and call text for a contact. When the contact
calls you, the device plays the selected ringing tone and
shows the call text or image (if the caller's phone number is
sent with the call and your device recognises it).
Select Menu > Contacts.
Add more fields to a contact details view — Select the
contact and Options
Define a ringing tone for a contact or contact group —
Select the contact or contact group and
tone, and select a ringing tone.
Remove the ringing tone from a contact — Select
tone from the list of ringing tones.
Add an image for a contact — Select a contact saved in the
device memory and
select an image from Gallery.
Define a call text for a contact — Select the contact and
Options Edit
>
and select .
Edit Options
> >
Options
Options Edit Add
> >
Add call alert text. Enter the call text,
>
© 2011 Nokia. All rights reserved.
Add detail.
>
Ringing
>
Default
image, and