Removing The Presser Foot; Attaching The Presser Foot; Setting The Needle Thread Tension - Pfaff expression 2038 Owner's Manual

Preparations

Removing the presser foot

Switch off the main switch.
Press the front part of the presser foot upwards and at the same
time the rear part downwards until it disengages from the
presser foot holder (30).

Attaching the presser foot

Place the presser foot under the presser foot holder (30), so that
when the presser foot lifter (51) is lowered, the pins of the foot
engage in the presser foot holder.
Check:
Please check that the presser foot is properly attached by raising
the presser foot lifter.

Setting the needle thread tension

Set the required amount of the needle thread tension (35) using
the markings on the tension dial.
The normal setting for sewing is 4 - 5. For decorative sewing,
darning and buttonhole sewing 3.
2:11