How To Update Your Machine - Pfaff creative vision Owner's Manual

2 Preparations

How to update your machine

Update via USB embroidery stick
This new software version makes it possible to
update your machine using the USB embroidery
stick and there is no need to connect your machine
to the computer.
Updating instructions
• Go to the PFAFF® web site at www.pfaff.com
to nd information about available updates.
• Follow the update wizard to prepare your USB
embroidery stick for the update.
• While pressing and holding the stitch restart
button and needle up/down button, turn your
machine on to start in update mode. Follow
the instructions on the PFAFF® HD screen to
update.
Note: The designs loaded on your machine will now be
included with the latest version of update, the machines
will no longer be delivered with a design CD.
Visit www.pfaff.com to learn more about how to register
and update your machine. When registering your
machine via Smart Update, you will be noti ed when a
new update is available.
Threading
When threading, pull the thread into the thread
guide by pulling it from the front to the back (A).
Make sure the thread clicks into place.
Then pull the thread underneath the bobbin thread
guide (B) on the pre-tension disc (C).
Winding while threaded
Make sure that the presser foot and the needle
are in the up position. To prevent the needle from
bending, pull the thread out of the needle.
Bring the thread up from the needle thread guide
(D), upward through the left-hand threading slot
and through the bobbin thread guides (E). Then
follow original winding instructions in the Owner's
manual (page 2:7).
B
C
D
A
E