Advertisement
53
Darning
Machine Setting:
A—O
.
B—
4
Prepare your machine for darning as follows:
Remove presser foot and drop machine feed. Use feed cover plate No. 41 251 to
increase tautness of fabric in hoops and permit free movement. To fasten the feed
cover plate to the machine, slip its finger into the hole of the needle plate, as illustrated,
turn, and fasten in position with bed slide (see illustration below).
R 5914
Attach darning foot as instructed on page 22, and suspend presser bar from the rear
of the face cover with darning hook No. 46128. Even though the presser bar is sus
pended, the presser bar lifter must be lowered to activate the tension, or the upper
thread tension will be released——and you cannot sew without it.
Place fabric into darning hoops.
45
R 5918
Advertisement
