Advertisement
Cording
Machine Setting: A
=
0
'
B
To cord on your Pfaff 72, use a cording foot and a twin needle.
Twin needles are available for needle distances of 1.2 (3/64"), 1.6 (1/16"), 1.8, 2.0 (5/64"), 2.5 (3/32"), 3.0, and 4.0 (5/32")
millimeters.
Cording feet are available in three varieties, as follows:
Pin tucks are made with cording foot No. 847 680 (7 grooves, 3/64" wide each) and a 1 .2-mm twin needle.
For narrow cording use cording foot No. 847 675 (5 grooves, 1/16" wide each; see ill.) and a 1.6-mm twin needle.
Wider cording is made with cording foot No. 847 671 (3 grooves, 5/64" wide each) and a twin needle with a needle distance
of 2.0 or 2,5 millimeters.
Cording feet and twin needles, System
13,
are supplied on special request and at extra cost.
Changing the N ee dIe and the Sewing Foot
Bring take-up lever to highest point, loosen needle set screw a, and pull
ordinary needle out of needle clamp. Insert twin needle into opening of
needle clamp and push it up as far as it will go. Make sure that the flat
side of the shank faces toward the back. Tighten needle set screw a
securely.
DR 865
40
'II
Advertisement
