Advertisement
Operate yowPfaff FreeStyle
Stitch width dial
The stitch width can be adjusted with this
dial (24). When selecting the width, the
needle must not be in the material.
Basic setting: Turn the stitch width knob
(24) to the symbol 1 (maximum stitch
width).
Exception: Straight stitch is sewn with
stitch width 0.
In chapter "Utility stitches and practical
sewing' (pages 19-38), you will find
recommendations in the tables for the
stitch width selection of individual stitches.
During sewing you can also change the
stitch width.
Needle position dial
In the center needle position
,
14 additional needle positions can be
selected by turning the needle positioning
dial (25) in increments to the left or right.
The furthest needle position to the left
can be achieved by turning the dial
(25) as far as it will go to the right. The
furthest needle position to the right
can be achieved by turning the dial as
far as it will go to the left. When the
position of the needle is being changed,
the needle must not be in the material.
Note: If you have selected the right
needle position, you can now use the
width dial (25) to increase or reduce the
width of the left side of the stitch. The
reverse applies also for needle position to
the left (seepage 42).
Advertisement
