Advertisement
Remove trimming waste container. The
seam width can be continuously adjusted as
desired from 1/8 to 3/16 inch (3.0 mm to 4.5
mm> by turning the seam width adjustment
knob (20). The 2-thread chainstitch is sewn
with an interval from 1/8 to 3/16 inch (3.0
mm to 4.5 mm>.
Note: The seam width can be more easily
adjusted if the looper cover is open.
Note: The seam width adjustments between 1/8 to 3/16 inch (3.0 mm to 4.5 mm) apply to
the right needle only. For the left needle, the set value is increased by 2.2 mm, i.e. the seam
width can be continuously adjusted from a scant quarter inch to a generous 1/4 inch (5.2
mm to 6.7 mm>.
Setting seam width
The settings are marked on the needle plate.
R is the seam width adjustment for rolled
seams.
—
3,0mm
•
(0.12')
4,5 mm
(0,18)
26
Advertisement
