Advertisement
Threading
16
2-thread chainstitch looper (violet)
Turn the handwheel in the direction of the
arrow until the 2-thread chainstitch looper
(18) is positioned at the extreme right.
Insert the thread by following steps 1 to 11.
Note: To facilitate threading, use the twee
zers included in the accessory box.
Pull about four inches (10cm) of thread
through the looper and lay it to the left un
derneath the presser foot.
Insert the thread along the path marked in
violet through thread guides 4 to 10.
Insert the thread from the front through the
eye 11 of 2-thread chainstitch looper.
Advertisement
