Opel Automobile Owner's Manual page 168

168 Vehicle care
Alloy wheels: Disengage wheel
bolt caps with a screwdriver and
remove. To protect the wheel,
place a soft cloth between the
screwdriver and the alloy wheel.
2. Install the wheel wrench ensuring
that it locates securely and
slacken each bolt by half a turn.
3. Ensure the jack is positioned
correctly with the vehicle jacking
points.
With versions of the Corsa OPC
with sill panelling or retrofitted sill
panelling no jack must be used.
The vehicle may be damaged.
4. Set the jack to the necessary
height. Position it directly below
the jacking point in a manner that
prevents it from slipping.
Back to overview