150
Vehicle care
2. Rotate bulb holder anticlockwise
to disengage.
Withdraw bulb holder from
reflector.
3. Push bulb into socket slightly,
rotate anti-clockwise and remove.
4. Insert new bulb by slightly
pressing and rotating.
5. Insert bulb holder in reflector and
engage by turning clockwise.
6. Put on protective cover and
engage wire clip.
Fog lights
Have bulbs replaced by a workshop.
Front turn signal lights
Have bulbs replaced by a workshop.
Tail lights
5-door passenger vehicle
1. Open side cover.
2. Remove plug connector by
pressing on bulb holder tab.
3. Hold bulb housing from the
outside; unscrew two retaining
nuts.
Back to overview