Using The Beard Styler Attachment; And Rq1155/80 Only) - Philips RQ1195 User Manual

english
44
2 Insert the lug of the trimmer into the slot in the top
of the shaver (1). Then press down the trimmer (2) to
attach it to the shaver ('click').
3 Press the on/off button once to switch on the trimmer.
4 You can now start trimming.
5 Press the on/off button once to switch off the trimmer.
6 Pull the trimmer straight off the shaver.
Note: Do not twist the trimming unit while you pull it off the
shaver.
7 Insert the lug of the shaving unit into the slot in the top
of the shaver (1). Then press down the shaving unit (2)
to attach it to the shaver ('click').

using the Beard styler attachment

(RQ1195,RQ1175 and RQ1155/80 only)
Note: Only use the Beard Styler attachment to trim facial hair
(beard, moustache and sideburns). Do not use it to trim body
parts below the neckline.
1 Make sure the shaver is switched off.
2 Pull the shaving unit straight off the shaver.
Note: Do not twist the shaving unit while you pull it off the
shaver.