Adjust Sound; Adjust System Settings - Philips CEM2250 User Manual

9 Adjust sound

The following operations are applicable to all
supported media.
Button Function
/ Rotate to increase or decrease the
volume level.
/ Press to mute or restore sound.
Press to enable or disable the
/
maximum volume.
DBB/AS
Press to enable or disable the
Dynamic Bass Boost (DBB) effect.
Press repeatedly to select a sound
equalizer.
[OPTIMAL] (optimal)
•
[FLAT] (flat)
•
[POP] (pop)
•
[USER] (user)
•
[TECHNO] (techno)
•
[ROCK] (rock)
•
[CLASSIC] (classic)
•
[JAZZ] (jazz)
•
1
Press and hold to activate the
setup of customized sound
equalizer.
2
Press
select the item to be adjusted:
[BALANCE] (balance)
•
range: 12L to 12R. (L=left
speaker, R=right speaker)
• [FADER] (fader) range: 12R
to 12F. (R=rear speaker,
F=front speaker)
• [BASS] (bass) range: -7 to
+7.
[TREBLE] (treble) range: -7
•
to +7.
3
Rotate
18 EN
or repeatedly to
to adjust the setting.
10 Adjust system
settings
1
Press MENU to access system settings.
2
Press or repeatedly until one of the
following settings scrolls.
[BEEP], [DIMMER], [DEMO], [BLACK
•
OUT], or [DANCE]
3
Rotate to change the setting.
[BEEP] [BEEP
ON]
[BEEP
OFF]
[DIMMER] [DIMMER
HIGH]
[DIMMER
LOW]
[DEMO] [DEMO
ON]
[DEMO
OFF]
[BLACK [BKO 10 S] Turn off the screen
OUT]
[BKO 20 S] Turn off the screen
[BKO OFF] Never turn off the
[DANCE] [DANCE
ON]
[DANCE
OFF]
Enable the beep
sound of buttons.
Disable the beep
sound of buttons.
Increase the
brightness level of
the screen.
Decrease the
brightness level of
the screen.
Demonstrate all
features after the
system stays inactive
for 2 minutes.
Disable the demo
mode.
automatically 10
seconds after last
operation.
automatically 20
seconds after last
operation.
screen.
Enable the spectrum
on the LCD display.
Disable the
spectrum on the
LCD display.