Play From Hard Media; Play From A Disc - Philips CEM2250 User Manual

Note
•
If the current received TA signal remains weak for
over 120 seconds, the unit will activate TA Seek mode
automatically. The TA Seek will seek for other station
with good condition of TA signal.
Tip
•
When a traffic announcement cuts in, user can short
press to terminate the traffic announcement, and
the unit will resume to previous playback mode.
Synchronize the system clock
You can synchronize the system clock with an
RDS station that transmits time signals.
1
Press MENU.
2
repeatedly until [CT] is
Press or
displayed.
3
Rotate to select a setting:
[CT ON]: turn on the RDS clock. Time
•
shown on the unit synchronizes with
that on the RDS station.
[CT OFF]: turn off the RDS clock.
•
Tip
•
The accuracy of the transmitted time depends on the
RDS station that transmits the time signal.
14 EN
6 Play from hard
media
You can use this system to listen to audios that
are stored on a compatible disc or USB storage
device.

Play from a Disc

Note
•
You cannot play CDs encoded with copyright
protection technologies.
You can play commercially available audio CDs
and these discs:
• CD-Recordables (CD-R)
• CD-Re-writables (CD-RW)
• MP3 CDs
• WMA CDs
Note
•
Ensure that the disc contains playable content.
1
Insert the disc into the disc slot with the
label side facing up.
» Play starts automatically.
• If play does not start automatically,
press to start play.
2
To eject the disc, press .
» When the disc is ejected, the system
switches to the previous source or
radio mode.