Viewing The Connections - Philips 24HFL2808D/12 User Manual

Connector
NOTE:
When connecting a device via the Side AV input, you must use the supplied connection cables to enable connection. See the illustrations above. To enable
PC audio, you will need to use the supplied SIDE AV CONNECTION cable's WHITE & RED inputs. If an external device is connected via the SCART socket,
the TV will automatically switch to AV mode. When receiving DTV channels (Mpeg4 H.264) or while in Media Browser mode, output will not be available
via the scart socket. We recommend that you plug all your cables into the back of the TV before mounting on the wall. Insert or remove the CI module only
when the TV is SWITCHED OFF. You should refer to the module instruction manual for details of the settings.
Studio 24/26HFL2808D/12
Note: You can use YPbPr to VGA cable (not supplied) to enable YPbPr signal via VGA input
WARNING: You cannot use VGA and YPbPr at the same time.

Viewing the connections

Type
Scart
Connection
(back)
VGA
Connection
(back)
PC/YPbPr
Audio
Connection
(side)
HDMI
Connection
(back)
SPDIFF
Connection
(back)
Side AV
Connection
(side)
Headphone
Connection
(side)
USB
Connection
(side)
CI
Connection
(side)
Cables
(Not supplied)
Device
P a g e | 10