Dimensions - Exmark Phazer PHZ19KA343 Operator's Manual

Specifications
• Speeds:
– 0-7.2 mph (11.6 km/hr) forward.
– 0-4.0 mph (6.4 km/hr) reverse.
• Drive wheel releases allow machine to be moved
when engine is not running and brake is off (left
and right sides of engine).
Tires & Wheels
Pneumatic
(Air-Filled)
Quantity 2
Tread Turf Mate
Size 18 x 7.00-8
Ply Rating 4
Pressure 13 psi (90 kPa)
Cutting Deck
• Cutting Width: 34.5 inches (87.6 cm)
• Discharge: Side
• Blade Size: (2 ea.) 17.50 inches (44.5 cm)
• Blade Spindles: Solid steel spindles with 1 inch
(25.4 mm) I.D. bearings.
• Deck Drive:
– Electric clutch mounted on vertical engine
shaft.
– Blades are driven by one belt
(w/self-tensioning idler) direct from
the engine.
• Deck:
Full floating deck is attached to out-front support
frame.
Two optional anti-scalp rollers.
Deck design allows for bagging, mulching or side
discharge.
• Deck Depth: 5.0 inches (12.7 cm)
• Cutting Height Adjustment:
Foot operated deck lift lever is used to adjust the
cutting height from 1 inch (2.5 cm) to 5 inches
(12.7 cm) in 1/4 inch (6.4 mm) increments.
Drive Front Caster
Semi-Pneumatic
2
Smooth
11 x 4.00-5
The cutting height adjustment handle has a
transport position and all adjustments can be
made while the operator remains seated.
• Mulching Kit: Optional.

Dimensions

Overall Width:
Without Deck
Deflector Up
Deflector Down
Overall Length:
70.0 inches (177.8 cm)
Overall Height:
39.0 inches (99.1 cm)
Tread Width: (Center to Center of
Tires, Widthwise)
Drive Wheels
Caster Wheels
Wheel Base: (Center of Caster Tire to
Center of Drive Tire)
45.0 inches (114.3 cm)
Curb Weight:
570 lb (258.5 kg)
14
34.5 inches (87.6 cm)
35.0 inches (89.0 cm)
44.0 inches (111.8 cm)
26.5 inches (67.3 cm)
29.0 inches (73.7 cm)