Galaxy 58715139402 Use & Care Manual page 5

Operating instructions
Getting Started
1. Load dishwasher (See Preparing and Loading
Dishes).
2. Add detergent (See Dishwasher Dispenser &
Detergents).
3. Add rinse aid, if needed (See Rinse Aid).
4. Turn dial clockwise to select cycle (See Wash
Cycle Selections).
5. Select desired energy OPTIONS (See Energy
Options).
6. Run hot water faucet nearest dishwasher until
water is hot. Turn water off.
7. To start, close door to latch.
Wash Cycle Selections
Note: Not all cycles available on all models.
Normal Wash
For regularly soiled dishes and silverware:
• Turn dial to NORMAL WASH.
• Select desired OPTIONS.
Light Wash
For lightly soiled or pre-rinsed dishes and
silverware:
• Turn dial to LIGHT WASH.
• Select desired OPTIONS.
Energy Options
Heat Dry Option
HEAT DRY option provides faster drying since the
heating element is on during the drying portion of
the cycle.
The HEAT DRY option in combination with rinse aid
will give you excellent drying results. The energy to
use HEAT DRY costs pennies per cycle. You may
turn offthe HEAT DRY option, howeveryou will have
items in your dish load that will not be dry at the end
of the cycle.
Air Dry Option
AIR DRY option saves electricity since the heating
element is off during the drying portion of the cycle.
To speed drying process, open the door slightly
after the cycle is complete.
Some water droplets may remain on door and tub
and in areas where dishes touch silverware basket _q_
and rack.
With either option, you may see water vapor
coming from vent during drying portion of cycle.
The drying option may be changed at any time
during the cycle and affects only the drying period.
Water Heating Delay
This dishwasher is equipped with a thermostat to
ensure that the water is heated to the proper
temperature to deliver optional cleaning and drying
results. The knob/timer on the dishwasher may
pause at approximately the 7pm position.
The dishwasher is not "stuck" here, but is simply
heating the water to the proper temperature before
advancing. If the dishwasher holds this position on
every cycle, then the incoming (house) water
temperature may be low. A minimum water
temperature of 120F is recommended to avoid this
water heating delay.