Specifications; Model Number; Specifications 2.1 Model Number; Engine - Exmark Metro HP MHP3614KA Operator's Manual

PART NO. 413206
LOCATION: Top of Cutter Deck, Under
Center Belt Shield (36")

2. SPECIFICATIONS

2.1 MODEL NUMBER:

Serial Nos. 150,000 – 189,999: MHP4816BV; MHP5216BV
Serial Nos. 150,000 – 219,999: MHP3614KA; MHP4814KA
Serial Nos. 150,000 & Higher: MHP3615KC; MHP4815KC
Serial Nos. 160,000 & Higher: MHP4817KA; MHP5217KA
Serial Nos. 190,000 & Higher: MHP4815KA
Serial Nos. 220,000 & Higher: MHP3615KA

2.2 ENGINE

2.2.1 Engine Specifications: See your Engine Owner's Manual.
2.2.2 3600 RPM (No Load).

2.3 FUEL SYSTEM

2.3.1 Capacity: 5.0 gal.(18.9 L.)
2.3.2 Type of Fuel: Regular unleaded gasoline, 87 octane or higher. In countries
using the research method, it should be a 90 octane minimum.
2.3.3 Fuel Filter: Replaceable in-line
2.3.4 Fuel Shut-Off Valve: 1/4 turn

2.4 SAFETY INTERLOCK SYSTEM

Operator must have transmission in neutral and blade clutch disengaged to
start engine. Release of OPC levers will cause the engine to stop if
transmission is not in neutral and/or blade clutch is engaged.

2.5 STEERING/BRAKE CONTROL:

Fingertip drive control levers provide independent speed control, braking and
neutral to each drive wheel for moving, stopping and power turning. Parking
brakes are engaged by locking drive control levers in the "brake" position.

2.6 TRANSMISSION:

2.6.1 Peerless 700-061, five speeds forward and one reverse.
2.6.2 Speed Range:
st
1 2.0 mph (3.22 km/h) 4
nd
2 2.7 mph (4.35 km/h) 5
rd
3 3.5 mph (5.63 km/h) Rev. 3.1 mph (4.99 km/h)
PART NO. 413327
LOCATION: Top of Cutter Deck, Under
Belt Shield (48" & 52" Decks)
th
4.1 mph (6.60 km/h)
th
6.2 mph (9.98 km/h)
- 8 -