Frigidaire FPIC3695MSA Use & Care Manual page 15

Beforeyou
call for service, review this list. It may save you time and expense. The list includes common
occurrences that are not the result of defective workmanship or materials in this appliance,
Entire cooktop does
not operate.
Cooktop controls are locked, Set the cooktop controls to unlock the Cooktop.
Make sure household electrical circuit breaker is ON and that power is properly supplied to the
Cool<top.
Service wiring is not complete. Contact installation agent or dealer.
Electrical power outage. Check house lights to be sure. Call your local electric company for
service.
Cooktop turns OFF
while cooking.
Cooking Zone does
not heat food (Power
level is flashing).
Cooking Zone does
not heat food.
Cooktop internal heat sensor has detected high temperatures inside the appliance. Be sure
the appliance vent holes are not blocked. Refer to the Installation Instructions supplied
with the cooktop for more detailed cooktop installation information.
Fluids spilled or object lying on controlsarea of cool<top. C lean spills or remove object. Re-power
cooktop.
No cookware was placed on the Cooking Zone, or the cookware material type is incorrect for
Induction Cooking.
Cookware bottom not barge enough for Cooking Zone.
Cookware
Cookware
Cookware
No power
checklist.
is warped or in poor condition.
is not centered on Cooking Zone.
resting on cooktop trim or does not rest completely on cooktop surface.
to the appliance. Check steps under "Entire cooktop does not operate" in this
Incorrect Cooking Zone control setting. Make sure the correct control is ON for the Cooking Zone being
used.
Cooking Zone heats
food too hot or not
hot enough.
Food does not heat
even ly.
Poor cooking results.
Incorrect power level setting. Adjust the power level setting higher or lower and refer to
recipe for guidance and adjust accordingly.
Lightweight or warped pans were used. Be sure to use good quality cookware.
Use only fiat bottom, evenly balanced medium or heavyweight cookware. Heavy and
medium weight pans heat evenly. Because lightweight pans heat unevenly, foods may burn
more easily.
Adjust Cooking Zone power level setting until the proper amount of heat is obtained.
Many factors affect cooking results. Adjust the recipe's recommended power levels or cooking
times.
Cooktop Zone Control
displays C or timer
display displays a 2
digits error code,
Cookware is too lightweight or warped. Use heavier quality cookware so foods being
prepared may cook more evenly.
Induction Cooktop main control has detected a fault or error condition. Try turning electrical
power supply OFF and back ON to cooktop in order to reset Cooktop main controls. Make
sure nothing touch control panel area (utensils, cookware, etc.). If fault recurs, record fault
number and turn power supply to Cooktop OFF. Call service for assistance.