Advertisement
TEMPERATURE
CONTROL
Electromechanical
Temperature
Control (Chest and
Some Upright Models)
The electromechanical
temperature control is located in-
side the freezer on upright models, and on the left exterior
wall on chest models (see figure 1).The temperature is
factory preset to provide satisfactory food storage temper-
atures. However, the temperature control is adjustable to
provide a range of temperatures for your personal satisfac-
tion. To adjust the temperature setting, turn the tempera-
ture control knob clockwise or counter clockwise. Allow
several hours for the temperature to stabilize between
adjustments.
When the freezer is initially plugged in, the red
"HI TEMP" indicator will be on and the buzzer will
sound. The indicator light will stay on until the freezer
temperature is below 23°R To silence the buzzer,
press the ALARM RESET button.
If a malfunction causes the temperature
inside the
freezer to rise above 23°K the "HI TEMP" light will turn
on and the buzzer will sound. The buzzer will sound
every hour until the freezer temperature is below
23°R To silence the buzzer, press the ALARM RESET
button.
Should an "E" appear on display, contact your authorized
service technician for repair. Until changes are made,
freezer will continue to run.
Deluxe Electronic
Temperature Control (Some Upright
Frost Free Models)
Refer to the Electronics Control Guide supplied when you
purchase a deluxe electronic upright model. See Figure 3
for deluxe electronics control panel.
Electromechanical Control
Figure 1
Standard
Electronic Temperature
Control (Some Up-
right Frost Free Models)
The standard electronic temperature control is located
outside the freezer (see Figure 2). Temperature is factory
preset to provide satisfactory food storage temperatures.
To adjust the temperature setting, move the UP (A) symbol
for colder temperatures and DOWN (v) symbol for warmer
temperatures on the control panel. Allow several hours for
the temperature to stabilize between adjustments.
To turn off freezer, press DOWN
(v) symbol until display shows "0".
To activate freezer, press UP (A)
until display shows "4" or desired
setting.
To keep the temperature setting
from being accidentally changed,
the control may be locked. This is
done by pressing "Alarm Reset"
for 3 seconds. "12' w ill then ap-
pear on display. To unlock the
control, press "Alarm Reset" for 3
seconds. For the first second, "U"
will appear, and then the current
temperature will appear.
Temp Alarm
This feature is designed to
provide a warning if the inside
temperature exceeds 23°R
"HI TEMP" feature operates
on household electricity. It
will not function if household
electricity is interrupted.
[] Bi Ten0p
[] [_¢erAjar
Standard Electronic
Temperature Control
Figure 2
Upright Models
Figure 3
NOTE: Your freezer may have some, or all of the
features
listed below. Become familiar with these fea-
tures, and their use and care,
SECURITY LOCKWITH
POP-OUT KEY
This security lock fastens the door snugly, ensuring stored
food is secure. To lock or unlock the freezer, push the key
into the lock and turn.The
key pops out of the lock after it
has been turned.
SLIDE-OUT
BASKET
(SOME UPRIGHT MODELS)
A Slide-Out Basket (some models),
located at the bottom
of the freezer, provides separate storage space for items
that are difficult to store on freezer shelves. To remove the
basket, pull out and lift up.
INTERIOR
LIGHT
The light comes on automatically when the door is opened.
To replace the light bulb, turn the temperature control to
OFF and unplug the electrical
cord. Replace the old bulb
with a bulb of the same wattage.
Advertisement
