Installation - Emerson MW8119SB Owner's Manual

FEDERAL COMMUNICATIONSCOMMISSION RADIO
FREQUENCY INTERFERENCESTATEMENT
WARNING:
This equipment generates and uses ISM frequency energy and if not installed and used properly,
that is in strict accordance with the manufacturer's instructions, may cause interference to radio
and television reception.
It has been type-tested and found to comply with limits for an ISM Equipment pursuant to part 18 of
FCC Rules, which are designed to provide reasonable protection against such interference in a
residential installation.
However, there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by one
or more of the following.
, ° Reorient the receiving antenna of radio or television.
• Relocate the Microwave oven with respect to the receiver.
° Move the microwave oven away from the receiver.
° Plug the microwave oven into a different outlet so that microwave oven and receiver are on
different branch circuits.
THE MANUFACTURER is not responsible for any radio or TV interference caused by
UNAUTHORIZED MODIFICATION to this microwave oven. It is the responsibility of the user to
correct such interference.
ARCING
If you see arcing, press STARTISTOP button and correct the problem.
Arcing is the microwave term for sparks in the oven.
Arcing is caused by:
• Metal or foil touching the side of the oven.
• Foil not molded to food (upturned edges act like antennas).
• Metal, such as twist-ties, poultry pins, or gold rimmed dishes, in the microwave.
• Recycled paper towels containing small metal pieces being used in the microwave.
DO NOT LEAVE OVEN UNATTENDED WHILE COOKING!
SAVE THESE INSTRUCTIONS
4