Table of Contents
Advertisement
REMOVABLE
OVEN
DOOR
To remove:
1. Open the door to the stop position (see IIIustreUon).
2. Grasp the door at each side and rift up and off the
hinges.
NOTE: When the door is remved
and hinge anlts
arc at stop posiUon,
do not bump or try to rove
the hinge
arms.
The
hinges
could
snap back
causing
an injury to the bands
or damage
to the
porcelain
on the front
of the range.
Cover
the
hinges with toweling
or empty
towel
rolls while
working
in the oven area.
To replace:
1. Hold the door over the hinges with the slots at the
bottom edge of the door ,ned up with the hinges.
The
hinge
arms
must
still
he
in the
stop
posiUon.
2. Slide the door down onto the hinges as tar as it will
go and close the door.
STOP (BROIL) POSITION
_
HINGE
REMOVAL
OF PACKAGING
TAPE:
When packaging tape is removed from your appliance, you may find some adhesive still on the product. To remove
t he ad heslve and assure you do not damage the finish, use an application of household liquid dIahweshlng detergent,
mineral o11,or cooking oit. Apply with a soft cloth. DO NOT use a plastic pad or equivalent. Wipe dry and then apply
an appliance polish to thoroughly
clean and protect the surface. This procedure Is also sate for the face of microwave
doors and other plasUc parts.
NOTE:
The piasUc tape that is not removed from chrome trim on range parts CANNOT
he removed If baked on.
12
NEMNT93
Advertisement
Table of Contents
