Safety Signs - Exmark Frontrunner Operating Manual

1.6 SAFETY SIGNS

1.6.1 Keep all safety signs legible. Remove all grease, dirt and debris from safety
signs and instructional labels.
1.6.2 Safety signs must be replaced if they are missing or illegible.
WARNING
POTENTIAL HAZARD
♦ Hydraulic fluid escaping under pressure
can penetrate skin and cause injury.
WHAT CAN HAPPEN
♦ Fluid accidentally injected into the skin
must be surgically removed within a few
hours by a doctor familiar with this form of
injury or gangrene may result.
HOW TO AVOID THE HAZARD
♦ Make sure all hydraulic fluid hoses and
lines are in good condition an all hydraulic
connections and fittings are tight before
applying pressure to hydraulic system.
♦ The woven guards that protect the
hydraulic hoses may deteriorate and wear
over time. Check the guards frequently
and replace if necessary.
♦ Keep body and hands away from pinhole
leaks or nozzles that eject high pressure
hydraulic fluid.
♦ Use cardboard or paper, not your hands,
to find hydraulic leaks.
♦
Safely relieve all pressure in the hydraulic
system, by placing the motion control
levers in neutral and shutting off the
engine, before performing any work on
the hydraulic system.
WARNING
POTENTIAL HAZARD
♦
Fuel system components are under high
pressure.
WHAT CAN HAPPEN
♦
The use of improper components can
result in system failure, fuel leakage and
possible explosion.
HOW TO AVOID THE HAZARD
♦
Use only approved fuel lines and clamps
for high pressure systems.
9