Table of Contents
Advertisement
TO STORE ATTACHMENTS:
Remove dusting brush or upholstery tool. Snap into
appropriate
storage location.
Remove crevice tool from the wand by twisting.
Lay aside.
Remove the extension wand from the hose. Twist the
wand to the left and pull from the hose end.
Unlock the wand by
turning the wand
locking ring to the
UNLOCK position.
Slide the lower wand into
the upper wand. Turn the wand
" locking ring to the LOCK position.
Place the crevice tool down into the compressed
wand.
Snap into the appropriate
storage location.
Be sure the unit is turned off. Reinsert the hose fully
into the opening
on the lower body from which it
was removed.
Press firmly to assure connection.
NOTE: Brush assembly will not turn if hose is not fully
inserted.
Personal Injury Hazard
DO NOT place hands or feet underneath the unit
when insertingthe hose. The brushassembly begins
to revolve rapidly when the vacuum is tumed on
and isswitched to a carpet height setting.
EXTENSION HOSE
NOT INCLUDED IN ALL MODELS
The stretch hose attached
to the vacuum
cleaner
has two "J" shaped slots in the end where attach-
ments fit into.
Unit Hose
Extension Hose
The extension hose has two tabs on the end that can
be pushed into the slots and twisted to attach the
two hoses together.
Attachments
and the telescoping
wand can be
attached
to the other end of the extension hose for
additional
reach.
If your model did not come with an extension hose,
one can be purchased
at any SEARSretail store
under part number 20-52571.
When using the regular hose or with the extension
hose attached, the cleaner should be on a solid
surface on the same level or below the level of
the user's feet. DO NOT use the hoses when the
cleaner is above the level of the user'sfeet.
ATTACHMENT U SECHART
CLEANING
AREA
ATTACHMENT
DUSTING BRUSH
(_
CREVlCE TOOL
FABRIC BRUSH
_)
Fumiture*
X
X
X
Between
Cushions*
Drapes*
X
*Always clean attachments
before using on fabrics.
x
x
x
x
Stairs
Walls
X
Advertisement
Table of Contents
