Setting The Clock And Minute Timer - Kenmore 790.79992100 Use & Care Manual

Table of Contents

Advertisement

Available languages

Available languages

Setting the Clock and
Minute Timer
D
OVEN
e
PREHEAT
e LOCK
lNote: The oven function wi!tnot work
"1
if the time of day clock is not set.
I
When the range is first plugged in, or when the power supply to the range has
been interrupted, the display wit1flash "12:00"
1.
Push _.
2_ Within 5 seconds, push and hold the _
or (_
until the correct time
of day appears in the display,
Note: The clock cannot be changed during any timed bake or self-clean
cycle,
1.
Push _.
2
Push the _
to increase the time in one minute increments,
Push and
hold the (_
to increase the time in !0 minute increments The timer can
be set for any amount of time from 1 minute to '11 hours and 59 minutes
Note: If you push the I_
first, the timer wilt advance to 11 hours and 59
minutes.
3.
The display shows the timer count down in minutes until one minute
remains. Then the display will count down in seconds.
4.
When the set time has run out, the timer will beep 3 times It will then
continue to beep 3 times every 60 seconds until _
is pushed,
Note: The minute timer does not start or stop cooking, it serves as an extra
timer in the kitchen that will beep when the set time has run out. The minute
timer can be used alone or during any of the other oven functions When the
minute timer is in use with any other mode, the minute timer wilt be shown in
the display, To view other functions, push the function pad for that mode
To Change the Minute Timer while it is in use:
While the timer is active and shows in the display, push and hold the _
or
(_to
increase or decrease the time
To Cancel the Minute Timer before the set time has run out:
Push _.

Advertisement

Chapters

Table of Contents
loading

Table of Contents