JVC GR-D250 Instructions Manual page 26

26
EN /vII:HUb I'UI_ UI.: IAILI.:U AUJ U3,1MI.:H I
CAMERA DISPLAY
• The l!" (CAMERA DISPLAY) settings are
effective even when the Power Switch is set to
'1_". However, the menu settings can be changed
only when the Power Switch is set to "_".
• The l!" (CAMERA DISPLAY) settings except
BRIGHT" are effective only for shooting.
[ ] = Factory-preset
:]-'t[d:bd
pg. 15, "Brightness Adjustment Of The
Display"
io] # I[,.1[_] :1=1 =1 _I
LCD: Keeps the camcorder's display (except the
date, time and time code) from appearing on the
connected TV screen.
[LCD/TV]: Makes the camcorder's display
appear on screen when the camcorder is
connected to a TV.
OFF: The date/time does not appear.
[AUTO]: Displays the date/time for approx. 5
seconds when the Power Switch is set from
"OFF" to '_" or "[]".
ON: The date/time is always displayed.
_ V.,I ; | ;:r;_ul [ o]_I
lllLVJl_[_o] D]_
[OFF]: Time code is not displayed.
ON: Time code is displayed on the camcorder
and on the connected TV. Frame numbers are
not displayed during recording. ( - pg. 19)
[ENGLISH] / ESPANOL
The language setting can be changed.
( pg. 14)
I PlaybackMenus
1'_ VIDEO
[ ] = Factory-preset
SOUND MODE and NARRATION
During tape playback, the camcorder detects the
sound mode in which the recording was made,
and plays the sound back. Select the type of
sound to accompany your playback picture.
According to the menu access explanation on
page 22, select "SOUND MODE" or
"NARRATION" from the Menu Screen and set it
to the desired parameter.
[STEREO H]: Sound is output on both "lZ' and
"R" channels in stereo.
SOUND L D: Sound from the "1" channel is
output.
SOUND R 4: Sound from the "R" channel is
output.
[OFF]: Original sound is output on both "U' and
"R" channels in stereo.
ON: Dubbed sound is output on both "E' and "R"
channels in stereo.
MIX: Original and dubbed sounds are combined
and output in stereo on both "lZ'and "R"
channels.
[SP] / LP
Allows you to set the video recording mode (SP
or LP) depending on your preference. It is
recommended you use "REC MODE" in VIDEO
Menu when using this camcorder as a recorder
during dubbing. ( pg. 35, 36)
ie.] I(eIe.] [ q.*1e_lN
:] IF:I _I[4[-"]:[e.]-"I
pg. 14, "Date/Time Settings"
pg. 20, "Blank Search"
_i SYSTEM
Each setting is linked with '_ SYSTEM", which
appears when the Power Switch is set to 'I_".
( pg. 22)
• The parameters are the same as in the
description on page 25.