Picture Control Adjustments - JVC TV-13140 User Manual

PICTURE CONTROL ADJUSTMENTS
Picture controls are factory preset but you can adjust them individually as fallows:
_MENU
Todisplaythepictureadjustrnentscreen, prass _===_ PresstheSET+or-buttontosalectthe the MENU button. PIC_TUREopUon,then press the ENTER button.
Press the SET + or - button to select the TV
SET-UP option, then press the ENTER button.
SET÷
SET+
SET-
BRIGHTNESS
• Press the ENTER button until "BRIGHTNESS"
appears on the screen, then press the SET + or -
button to adjust the brightness of the picture. When
the SET + button is pressed, the darker portions of
the picture become lighter.
SET+
CONTRAST
rass
the ENTER button until "CONTRAST _ appears _
on the screen, then press the SET + or - button toadjust
the contrast of the picture. Pictures look sharpest in
the daytime (bdght Jight) by increasing the contrast. At
night (dim light), the sharpest picture is obtained b
reducing the contrast.
_'T_
NOTE: TPe CONTRAST default
settingis set to rna_imum
• at the facts_y.
COLOR
)utton until =COLOR"
the screen, then press the SET + or - button to
adjust the co_or intensity of the pioture. The control
should be set when calors appear norrnal in intensity
and bdlliance.
SELF+
SET-
TINT
screen, then press the SET ÷ or - button to adjust the
tint of the picture. This determines how accurately the
colors are reproduced by the TV. Adjusting the tint for
natural fac_ tone is the best method of obtaining
accurate color reproduction of the entire picture.
SET+
O:,..-"
SET-
SHARPNESS
appears on the screen, then press the SET + or -
button to adjust the sharpness of the picture.
SET+
RESET PICTURES (CANCEL)
the CANCEL button while makin
adjustments will return all adjustments to the factory
preset levels.
CANCEl.
%
NOTE: The On-screen display will disappear 6 seconds after finishing an adjustment or by pressing the MENU
button three times. The settings can only be adjusted when they are displayed on the TV screen.
24 25