Turning The Power On And Off - JVC FS-X3 Instructions Manual

STANDBY/ON
O/I
DJSPLAY
d_ @c_s
co,,,, UNE
L I PM/AM
AHBPRO
AP off . i _ _ _ BASS/TREBLE
O,MMER !'
MUTENG
AHB PRO
Source indicator
Source
selector
VOLUME+,-
CDlamp
(Inside)
H
STANDBY/ON O/I
indicator STANDBY/ON
PHONES
I I
Display
Turning the Power On and Off
Turning the System On
Press the STANDBY/ON 0/I button.
Thedisplayconesonand HELLO isdisplayedonce.The
STANDBY/ON indicator lights in
green.
The System comes on ready to continue in the mode it was
in when the power was last turned off.
For example, if the last thing you were doing was listen-
ing to a CD, you are now ready to listen to a CD again. If
you wish, you can change to another source.
If you were listening to the Tuner last, the Tuner comes
on playing the station it was last set to.
Turning the System Off
Press the STANDBY/ON O/I button again.
"SEE YOU" is displayed and the display goes out, except for
the clock display. The STANDBY/ON indicator lights in red.
Some power is always consumed even though power is
turned off (called Standby Mode).
To switch off the System completely, unplug the AC
power cord from the wall outlet. When you unplug the
AC power cord, the clock will be reset to 0:00.
Changing the Source
The System has four sound sources, CD, FM, AM and
LINE. Select one of sources you want to listen.
For example, when you want to lislen to the CD, select the
source "CD".
On the Unit
Turn the Source selector 1o select the source you want.
Each time you turn it clockwise or counterclockwise, the
source changes as follows.
CD _ FM _ AM _ LINE
The selected source name will appear on the display and the
Source indicator on the Unit will light up.
On the Remote Control
cB
:Press the CD I_/11 button to select the source "CD'.
You can listen to the CD. If a CD is inserted, the CD
will be played back.
FM/AM
:Press the FlVl/AM button to select the source "FM" or
"AM".
You can listen to the FM or AM broadcast.
(_ } :Press the LINE button to select the source LINE .
You can listen to the music through external equip-
ment.
10