Operation - Husqvarna 917.279220 Owner's Manual

OPERATION
KNOW YOUR TRACTOR
READ THIS OWNER'S MANUAL AND SAFETY RULES BEFORE OPERATING YOUR TRACTOR
Compare the illustrations with your tractor to familiarize yourself with the locations of various controls and adjustments,
Save this manual for future reference,
03005
FIG. 13
Our tractors conform to the applicable safety standards of the American National Standards Institute.
(A) ATTACHMENT LIFT LEVER - Used to raise and lower the
mower or other attachments mounted to your tractor.
(B) BRAKE PEDAL - Used for braking the tractor and starting
the engine.
(C) PARKING BRAKE - Locks clutch/brake pedal into the
brake position.
(D) THROTTLE CONTROL - Used to control engine speed.
(E) ATTACHMENT CLUTCH SWITCH - Used to engage the
mower blades, or other attachments mounted to your tractor.
(F) IGNITION SWITCH - Used for starting and stopping the
engine.
(G) REVERSE OPERATION SYSTEM (ROS) "ON" POSITION
- Allows operation of mower or other powered attachment
while in reverse.
(H) LIGHT SWITCH -Turns the headlights on and off.
(J) CRUISE CONTROL LEVER - Used to set forward
movement of tractor at desired speed without holding the
forward drive pedal.
(K) FORWARD DRIVE PEDAL - Used for forward movement
of tractor.
(L) REVERSE DRIVE PEDAL - Used for reverse movement of
tractor.
(M) FREEWHEEL CONTROL - Disengages transmission for
pushing or slowly towing the tractor with the engine off.
(N) CHOKE CONTROL - Used when starting a cold engine.
(P) SERVICE REMINDER / HOUR METER - Indicates when
service is required for the engine and mower.
(Q)
12-VOLT POWER
PORT
- Used for 12-volt acces-
sories.
11